since there where lots of race sierras, why cant I find any sierra centre locking hubs?
maybe I am wrong and they don't exist, but someone must have made some given the amount of races/events they ran in.
can they be converted, if so how, as I cant see past getting the hub nut off if there is a big cylinder sticking out
the reason I ask is ive still yet to find any 13" wheels I really like, but have found loads of centre locking 13" wheels I like
you guys know everything so someone enlighten me?
also if its possible are they IVA safe?
i guess the race sierras didn't have normal standard sierra uprights?
quote:
Originally posted by MikeFellows
also if its possible are they IVA safe?
quote:
Originally posted by matt_claydon
quote:
Originally posted by MikeFellows
also if its possible are they IVA safe?
Exterior projections:
12.
Any protrusion of a wheel, wheel nut, hub cap, or wheel disc from the wheel rim must be at least blunted.
13.
Wheels must not be fitted with wing nuts.
15. Any wheel disc or central wheel securing nut that project beyond the
plan form must have a radius of curvature of at least 30mm, and cannot project from the plan form by more than 30mm.
[Edited on 15/3/10 by matt_claydon]
does nobody run centre locking wheels on a sierra based 7?