Hello all,

Somehow i have managed to loose the pins which connect the sierra rear brake calipers to the rear hubs (the pins which allow the calipers to slide back and forth).

Here's a picture showing the bit that ive lost which are normally covered with a small boot (ive actually lost all four which came off the old sierra !)
http://gallery.me.com/tkipling#100008/IMG_7545&bgcolor=black

Does anyone know where i can get 4 replacements from ?

Cheers
Tris

Ebay

Russ

Any motor factor can get you the kit.

Thanks Russ, one ordered now. I have the bolts/boots etc already having just lost the pins but replacing them isn't hardly going to break the bank

PS, just noticed you too are building a GTR - how far have you got ?

Cheers
Tris

quote:

---

Originally posted by Tris
Thanks Russ, one ordered now. I have the bolts/boots etc already having just lost the pins but replacing them isn't hardly going to break the bank

PS, just noticed you too are building a GTR - how far have you got ?

Cheers
Tris

---

Yes, going for ZX12 power Got my chassis at the end of January.

Ive been trying to document my progress as ive gone along, please feel free to have a look -

http://www.triskipling.co.uk/GT-R/The_Build/The_Build.html

Cheers
Tris

[Edited on 17/3/10 by Tris]

Had a look at your blog - nice work on the car buddy! You've made good progress so far.

I can't wait to get on with mine. I'm fitting an Audi/VW 1.8T engine and transaxle instead of the bike engine (and to be a bit different!!).

Have you got a link to where you got the front brake set up? Is it a Rally Design kit?

Cheers,
Russ

The front setup is a bit of a custom from Paul. The disks are from an Audi (i think) with a small spacer being used between the inner face of the disk and the sierra hub (the disk being designed for a larger hub).

The calipers are then just Willwood Midilites 283x24.

When comparing pauls prices for this setup with just the calipers from Rally Design, paul worked out cheaper, so thats what i went with. They do look very pretty once on

Be very interested in seeing how your's goes together though . I did hear that someone is putting a Audi Diesel into one GT-R for endurance racing !

Cheers
Tris

[Edited on 17/3/10 by Tris]

Thanks, that's interesting stuff, I'll have to talk to Paul about that brake setup.

I did consider a diesel Audi engine to make the car a bit like my avatar
<<<<<<<<<<<<<<<<<<<<<
but I've gone for the petrol engine with a remap so should see close to 200bhp. Having said that, I just won a bargain K04 turbo upgrade on eBay a few minutes ago . Yum!

Back on topic... I got some from Bigg Red when I lost mine. Re-plated too, so even if you've not lost them it's worth switching them over if yours are looking a bit scabby.

Chris