any idea welcome!
tried to get more weight on front but was not able
rear is about 58% and cross close to 50% (49.8)
any good?



[Edited on 20/3/10 by antonio]

[Edited on 20/3/10 by antonio]

[Edited on 20/3/10 by antonio]

Is this with you sitting in it?

Corner weights should be set with the driver in situ.

I would say that is near spot on. I would just get the front wheels the same weight each side.

Here is a picture of my car on the scales at AB performance with me in it.

Description

It's not possible to alter the front/rear % or the left/right % without physically moving or adding mass. Corner weighting only allows you to alter the cross weighting.

The weights should be set with drive in seat --- ie normal loaded condition.


Setting the front weights equal is ok for Formula type single seater but not ideal for a sports car.

The front rear weight distribution should be worked out and the left-right distribution then target weights worked out for each wheel.

my weight on driver side (me plus helmet and everything else) when did it and 25 liters of fuel on tank

[Edited on 20/3/10 by antonio]

Did the sums you are close to ideal


LF 118.5 RF 124.5

LR 162.5 RR 170.5

quote:

---

Originally posted by britishtrident
Did the sums you are close to ideal


LF 118.5 RF 124.5

LR 162.5 RR 170.5

---