LocostBuilders - powered by XMB

mojo uprights mk1

trueblue - 8/5/04 at 12:07 AM

Does anybody have any info ; pix ideal of the arrangement on the mojo using Fiesta
uprights?

robinbastd - 8/5/04 at 10:04 PM

IIRC the Mojo 1 used the same set up as theSylva/Raw Striker.........there are a few more of them around than Mojo's so I'm sure you'll find plenty of pics,
HTH
Ian

[Edited on 8/5/04 by robinbastd]

Dreckly - 8/5/04 at 10:24 PM

The Slyva Mojo Mk1 used a tubular top rocker arm assembly with inboard shocks (the spindle is very similar to a metro rear radius arm pivot shaft!!). Earlier Strikers, Pheonixs, Furys etc used an aerofoiled rocker arm of slightly different dimensions and heavier. Mojo Mk1 also uses fiesta rack as opposed to Escort Mk1/2.
Cheers.
Ken.