Board logo

stepped washers?
bigfoot4616 - 25/4/10 at 10:15 AM

my accelerator pedal is fixed to a bar that runs in one of these each end


one has fallen in bits.

any one know where i can get some from, found some on ebay but they're to small.
not even sure what the correct term is for them

cheers

coozer - 25/4/10 at 10:21 AM

Pedal bush, is it fibre or plastic? Standard Ford fitment if it is the same as my old Striker.

tomgregory2000 - 25/4/10 at 10:21 AM

top hat washer?

Davegtst - 25/4/10 at 10:22 AM

Renault Clio's use plastic ones on the clutch pedals. Not sure if they are the right size though.

bigfoot4616 - 25/4/10 at 11:13 AM

quote:
Originally posted by coozer
Pedal bush, is it fibre or plastic? Standard Ford fitment if it is the same as my old Striker.


its plastic.

ford fitment sounds hopefull, need it sorted for croft next monday.

important dimensions are center bore 9.7mm and the hole it sits in is 13.8mm

bigfoot4616 - 26/4/10 at 04:18 PM

found some in the scrappy that will do for now with a bit of fettling until i get the right ones