Board logo

type 9 gearbox probs
chris666 - 28/6/10 at 08:22 PM

Could anyone tell me where reverse is on the type-9 gearbox.I cannot seem to engage it,i have a westfield extension,and the reverse stop has been removed as per instructions.

Chris

blakep82 - 28/6/10 at 08:24 PM

push across and up so the lever is next to first gear

[Edited on 28/6/10 by blakep82]

eddie99 - 28/6/10 at 08:34 PM

I've been having a similar problem, but i found its up left, and you have to do it really hard to engage it.

rusty nuts - 28/6/10 at 08:46 PM

Why do the instructions say remove the stop?
Reverse should be over to the left and forward

blakep82 - 28/6/10 at 09:01 PM

quote:
Originally posted by rusty nuts
Why do the instructions say remove the stop?
Reverse should be over to the left and forward


i'm guessing you have to remove the stop because the standard lever has to be pushed down to get reverse, i guess the remote doesn't have the facility to make that bit work?

rusty nuts - 29/6/10 at 06:39 PM

Made mine following the information on David Jenkins site , cost a whole £0.92 , converts the lever to a quick shift AND has the reverse stop working correctly! So why can't the Westfield extension costing fifty times more work properly?