Handbrake Cable ... Too long might have to cut one end ... Any ideas ... Also looks like will have to weld the lug on what I cut off ... Or anyone got any ideas or pictures of the handbrake fully connected ... Thanks ... Mike ...

Leave the lugs on and cut the other end, shorten the outer cover then rejoin the cable using a proprietry joint something like

link

Thanks for the idea ... 2 heads better than one ... that will be tomorrows job ... Thanks again ...

Will those joiners pass I V A

quote:

---

Originally posted by davrus
Will those joiners pass I V A

---

Yes they will, or should.

If done up properly the cable will snap before the clamp lets go! (in my experience)