Board logo

Compomotive CXR
jeffw - 11/9/10 at 06:55 PM

Anyone one know the cheapest place to get a set of CXRs from ? I need 13 x7 & 13 x 6 for a Phoenix.

daniel mason - 11/9/10 at 07:05 PM

probably compomotive direct! think flak did a group buy on these a couple of months ago!

adithorp - 11/9/10 at 08:43 PM

Deal with Compomotive direct.

adrian

TimC - 12/9/10 at 05:52 AM

As above or George Polley if you need tyres as well...

flak monkey - 12/9/10 at 07:27 AM

Yep compomotive direct.

I tried to do a group buy but there was no interest

jeffw - 12/9/10 at 08:06 AM

I was going to get a set as follows

13 x 7J ET18 205/60 x 13 R888 GG
13 x 6J ET18 185/60 x 13 R888 GG

Anyone see an issue with this on a live axle Phoenix ? Currently it has 14 x 6J ET18 185/60 x 14 R888. The front discs are 265mm Wilwood so that should be OK.

Not sure if I would be better using 6J all round with the tyre sizes above or 7J with 205/60 front and back.

adithorp - 12/9/10 at 08:21 AM

Rim width to tyre width is a bit flexible and depends who you listen to.
After a bit of reading I never found a hard and fast rule. In the end I went for 7" with 205/60/13 and 6.5" with 185/60/13 on the front.
I've got Willwods powerlite front and rear (RD kits) and they go on the front easy and just fit over the h/brake rears.

adrian

jeffw - 12/9/10 at 08:24 AM

Thanks mate. Think I might do 7" all round.