Board logo

sierra rear hub nut diamiter?
daniel mason - 23/10/10 at 12:34 PM

is there 2 different sizes of rear hub nut for the sierra back end?
i ordered 2 hub nuts from mnr but they are about 27-28mm diamiter and the drive shaft ends ar about 22mm?
can anyone shed some light on this please

snapper - 23/10/10 at 12:55 PM

There are 2 or 3 driveshaft diametersbut the nut should take a 42mm socket

daniel mason - 23/10/10 at 12:56 PM

its the id of the bolt which is wrong! it just slides straight over the drive shaft end

Breaker - 23/10/10 at 01:03 PM

quote:
Originally posted by snapper
There are 2 or 3 driveshaft diametersbut the nut should take a 42mm socket


Think it was 41mm...

rusty nuts - 23/10/10 at 03:44 PM

quote:
Originally posted by daniel mason
its the id of the bolt which is wrong! it just slides straight over the drive shaft end


??? What bolt?

Johneturbo - 23/10/10 at 04:09 PM

quote:
Originally posted by rusty nuts
quote:
Originally posted by daniel mason
its the id of the bolt which is wrong! it just slides straight over the drive shaft end


??? What bolt?



I think he's getting his bolts and nuts mixed up!

daniel mason - 23/10/10 at 05:22 PM

the id of the hub nut is BIGGER than the drive shaft ends!