Board logo

Duratec Bellhousing
Nitrogeno25 - 26/10/10 at 05:52 PM

Does anybody has experience with Rally Design duratec bellhousing?

http://www.rallydesign.co.uk/product_info.php?cPath=1375_1781_1884&products_id=13566&osCsid=6vvo038fkodt6ilr2rob1mmi95

It seems to be the cheapest option now. I read somewhere that there were 2 designs and one allow to fit the engine close to the firewall.

I can't find information if these bellhousing is for hidraulic or cable clutch!

Thank you very much!

flak monkey - 26/10/10 at 07:36 PM

It will be for hydraulic clutch takes the ford v6 type release cylinder as standard.

Its also cut away on the side to allow engine to be pushed back in the bay.

big-vee-twin - 26/10/10 at 08:25 PM

You can see the differences on the RWD motorsport site. They do both types.

Not sure if the RD Concentric cylinder fits their Duratec Bell Housing.

Got all my bits from Titan Motorsport not the cheapest but at least they all fit together.

Nitrogeno25 - 30/10/10 at 03:11 PM

quote:
Originally posted by flak monkey
It will be for hydraulic clutch takes the ford v6 type release cylinder as standard.

Its also cut away on the side to allow engine to be pushed back in the bay.


Thank you very much!

The previous design does not cut away in the sides?? That's the main difference?

flak monkey - 30/10/10 at 04:57 PM

All the duratec bellhousings have cut away sides as far as I know.

Nitrogeno25 - 1/11/10 at 03:21 AM

quote:
Originally posted by flak monkey
All the duratec bellhousings have cut away sides as far as I know.


So what are they talking about when they say "new design"?

flak monkey - 1/11/10 at 07:48 AM

No idea, my above comments stand.

Most of the bellhousings on the market are made by Titan anyway.