Board logo

Next question..... Nut sizes - camber adjusters.
stevegough - 11/1/11 at 09:55 PM

Does anyone know what pitch and size (pretty sure they're M18) rear camber adjusters are? I need to get another 2 locknuts for my IVA retest.

[Edited on 12/1/11 by stevegough]

nick205 - 11/1/11 at 10:11 PM

MK ones were M20 IIRC - for the rear suspension - although re-reading I'm guessing your on about the front suspension

[Edited on 12/1/11 by nick205]

mad4x4 - 12/1/11 at 07:01 AM

IIRC thought that they they were M18 x 1.0mm think the 1.0mm pitch makes them harder I remember the normal lock nuts wouldn't fit . Try Butron power or NUMRICK or MK



[Edited on 12/101/11 by mad4x4]

rusty nuts - 12/1/11 at 07:08 PM

Same thread as the front upper joints, doubt it will be 18mm x1mm . When I got mine I think Lolocost sold them. Might be worth investing a couple of pounds in a set of thread gauges

[Edited on 12/1/11 by rusty nuts]

stevegough - 12/1/11 at 08:52 PM

quote:
Originally posted by nick205
MK ones were M20 IIRC - for the rear suspension - although re-reading I'm guessing your on about the front suspension

[Edited on 12/1/11 by nick205]



Thanks for the replies, lads,
No, they are for the rear, and I am certain about the M18 size - probably varies a little from kit to kit?

Rusty nuts is a fellow Luego chappie - and yes, I think they are the same front and rear. Doesn't help me a lot though - there isn't any thread showing at the front!

Just had a close look, they are M18 x 1.5 so that's what I'm going to order, Mel.

Cheers again guys. - any of you any input about the wheelnut question?....see....wrong nut

regards, Steve.