Board logo

Possible braking issues?
Rallye_Mark - 17/1/11 at 03:18 PM

Hey guys, I'm wondering if I will have any braking problems using my set-up or if it could be worked with using specific master cylinders and a bias bar?

I'm running 240mm vented front discs and the slightly larger 253 solid rear discs from a Sierra under my 13's, what master cylinders will i need and will I be able to adjust the bias enough to pass IVA?

Thanks

matt_gsxr - 17/1/11 at 04:04 PM

I had the same brake set-up, and had 2 equal sized master cylinders and a balance bar. SVA was fine.

blakep82 - 17/1/11 at 04:39 PM

i've got a slightly smaller master cylinder for the front. got 0.65 for the front, and 0.7 for the back. discs are slightly smaller on the back too though

Rallye_Mark - 17/1/11 at 06:22 PM

quote:
Originally posted by matt_gsxr
I had the same brake set-up, and had 2 equal sized master cylinders and a balance bar. SVA was fine.


Can you remember what size Master Cylinders you used? Also was the balance bar more one sized or close to the centre?

Cheers