After chasing steve a couple of times for a price from pro tech for a set of springs and shocks i've decided to ring them directly. can anyone help me with the specifications required for a road going car engined fury.

ta.

ok so as far as i can tell i'm looking for 4 x 12.5" fully extended eye to eye centres with bonded bushes 1/2" x 1.25" springs 150lbs rear 190lbs front.

does this sound right?

spring rates sound ok

total length of shocks sounds not too bad...unfortunaltely my sylva isnt stored in my home-garage...otherwise it would have been an easy check for me.

is protech not able to help..i mean they should have done dampers for a fury already?

I've got 12" open 8" closed. 1/2" bore bonded bushes. 2" springs 180lbs rear, 210lbs front.

The springs you've listed are about standard but there's been a few recently going to the heavier ratings with good results. Try asking on JPSC forum.

oh..what i should have asked: live axle or IRS.

@adi: you mean 2.25 diameter coils, i guess?

thanks for the replies. i'll ask on jpsc.

sorry yes meant to say its irs.