Can anybody help. Trying to het hold of the brackets I need to weld to my capri atlas axle to allow for the trailing arms
thanks

Fostek?

You can make your own as per the book Using IIRC 100X50 box section drill ( hole saw) a hole through the wide face the dia of your axle and then cut it in half down the erw seam.

I used Locost/Kit Car Escort MKIIAxle Brackets|eBayUK for both mine.





[Edited on 14/4/11 by big_wasa]

Just remember, when I welded mine on to the axle I was told to run the welds right round the axle to prevent possible heat distortion if you only weld the actual bracket area of contact.