Board logo

Steering
LBMEFM - 30/4/11 at 04:21 AM

On my MK Indy-Blade I am currently running 205/40/15 R888's at 15psi. Any suggestions on what would the setting for the tracking to give best handling and tyre wear. Barry.

mad-butcher - 30/4/11 at 09:40 AM

You'll probably get a 100 different answers to that question. I run 3mm difference (toe in) between the front edge of the rim and the rear edge of the rim (185 x 15 rims) no idea what it works out to in degrees, but it works fine for me.

tony

LBMEFM - 30/4/11 at 11:15 PM

Thanks Tony

Doctor Derek Doctors - 30/4/11 at 11:48 PM

quote:
Originally posted by mad-butcher
I run 3mm difference (toe in)
tony


All I can say to that is..... HOLY SHIT! Thats a poo load of Toe! 1mm Toe-In is alot even for racing.

Madinventions - 1/5/11 at 12:14 AM

Totally different car setup, but mine runs best with 0° toe and about 1 to 1.5° camber.