Basically i need a hung pedal box with bias brakes and hydraulic clutch. i sthere anything in the market that is available not wilwood nor tilton as they ar every expensive. Does the SVa require them to be of a specific design or thickness ( is it possibble to build one)????

Its not biased, but there is loads of room to fit an additional cylinder. Remote resv as well!

[Edited on 18/7/04 by Mark Allanson]
Rescued attachment X19Pedals.jpg

That looks like the sort of thing I'm after. Any chance of telling us what it's out of or am I missing something here?


Dominic

yep same here and are you selling it how much?

seen this ?

http://www.locostbuilders.co.uk/viewthread.php?tid=15459

better be quick - 36 mins left !

[Edited on 19/7/04 by protofj]

but no hydraulic clutch

Not sure if this helps, but:



Pedal box

I havent added the gas pedal yet, but it will be cable operated, and will bolt directly to the chassis.

quote:

---

Originally posted by alainmengoli@hotmail.com
but no hydraulic clutch

---

I just bought a tig welder and thought of building my own bt am worried about sva requirements.

alain, I thought you would have guessed!! X19 again, it wont fit a locost with the column running above the chassis, but would be OK if you ran it low down MK style.

I still have it in my aborted ideas box, but a little to heavy to post, but if any one is coming down on holiday, they can have for what I paid for it - £3.00 - but I'm open to offers

what you guys think of this idea but not sure where to ge the bias parts and bushes. Does the steel thickness have to be to a sva requirement?
Rescued attachment Jul_21_001.jpg

oops very big and only good for the southern hemisphere.