Hi all,

Happy New Year to all


My Raw Striker has a fixed length Panard rod for its live axle and wanting to modify it to be adjustable as the diff flange tends to rub on hard cornering against the tunnel chassis.

My problem is, where can I get a ready made left/righthand threaded stud of approx M12 or M14 with approx. 75mm length thread of each l/h and r/h. This allowing adjustment without removing the rod end.

Thanks

Range rover drag link, you want the one behind the axle.

Should be able to pick up on ebay cheaply enough

Or...

You can get a pre-built adjustable panhard from Fury Sportscars (and I'm sure other places as well) which is what I have on my Phoenix.