LocostBuilders - powered by XMB

Double Wishbone Complete Hub Assembly

maccmike - 4/1/13 at 11:07 AM

I want to change my front triumph uprights to a simple top and bottom ball joint affair.

Then I can then fabricate some new wishbones.

I need a pair of hubs, upright/carrier and calipers.

Anybody got anything to sell?

owelly - 4/1/13 at 02:34 PM

I have a pair that came off an early Silva Striker. I seem to think they were vauxhall PCD but I'll dig them out and take piccies over the weekend if you're interested. They are complete with discs and calipers.

maccmike - 4/1/13 at 04:33 PM

yes please that would be great

ceebmoj - 4/1/13 at 05:01 PM

I have a set of ford cortina uprights if they are of interest.

maccmike - 4/1/13 at 05:27 PM

is that with calipers etc?

b14wrc - 4/1/13 at 05:40 PM

I have a set of Cortina Calipers I'd sell if ceebmoj's didn't and owelly's were no good to you. Not trying to hijack a sale there.

Rob

maccmike - 4/1/13 at 05:52 PM

are you guys able to supply photos please

maccmike - 4/1/13 at 10:36 PM

bump

b14wrc - 4/1/13 at 11:06 PM

I've taken a photo of the Caliper for you but can't upload it at the moment. Photo bucket seems to be down......

b14wrc - 6/1/13 at 06:06 PM

These are the Cortina Calipers I have, look in good nick, just need a good clean up.

Rob

owelly - 13/1/13 at 11:41 PM

Sorry for the delay but these hubs were buried in my rented barn which isn't near to my house anymore....
Here's the piccies:

The pads all look to be in good condition and although the discs look a bit crusty, the rust just rubs off with a stiff finger!

maccmike - 13/1/13 at 11:47 PM

thanks for your time effort but Im fixed up now