A servo is usually connected into the inlet manifold between throttle body and engine,I can't picture how you could get a decent set up with the bike carbs as they sit directly onto head with no inlet manifold.
What car are you converting?
hi guys im new to the site.....im putting a r1 5jj in my car and just want to know how you guys get a vacumm to the brake servo....do I get one from the carbs on the engine..cheers
Very few kits have a brake servo and not seen a BEC with one.
As above.
A servo is usually connected into the inlet manifold between throttle body and engine,I can't picture how you could get a decent set up with the
bike carbs as they sit directly onto head with no inlet manifold.
What car are you converting?
You could tee all 4 of the vacuum ports in each inlet together and then run 1 pipe over to your servo which would give you the best bet of it working. As others have said though most people don't run a servo