The link was more a reference for a contact no. for an enquiry as to if they might have others in stock or be able to get them for you.
Hope you can find what your after
Cheers
G
[Edited on 15/12/04 by Mr G]
I want some plain 10.5" rotors, <9.6mm thick - the ones with a separate alloy mounting bell (which I'll make myself).
Only price I got so far was £75 + VAT each from APracing. Ouch
Anyone know a cheaper source?
Thanks
Bob C
Thanks but no cigar - those are all vented & much thicker than the ~9mm I'm after
Bob
Its ok - I gave up smoking.
The link was more a reference for a contact no. for an enquiry as to if they might have others in stock or be able to get them for you.
Hope you can find what your after
Cheers
G
[Edited on 15/12/04 by Mr G]
I'm toying with the idea of buying stock 10.5" discs for an ordinary car and machining the middle off and drilling the 6 bolt holes; why
should I not do this?
OK I'm worried about introducing stress raisers & creep in the cast.
Bob
If you are doing this, why not machine the bits from scratch?
Did you price the rotors from Wilwood?
--Chris