Will these mk1 ford focus zetec wheels fit a standard sierra based locost(front)/haynes(rear) suspension setup?

http://m.ebay.co.uk/sch/i.html?_nkw=322250603797

Thanks in advance

[Edited on 7/9/16 by craigdiver]

yes but the offsets are ET52.5 not ET35 to 38 so you may need spacers ~15 to 17mm thick


btw I've got a set of these exact one going spare and only the other size of the forth


[Edited on 7/9/2016 by mcerd1]

quote:

---

Originally posted by mcerd1
yes but the offsets are ET52.5 not ET35 to 38 so you may need spacers ~15 to 17mm thick

---

sorry edit that - some sierra's went as high as ET41 (still a bit off ET52.5 though)


the only sierra I know that came with 15" alloys was the 2wd cossie (sierra's are mostly 14" alloys from memory)

some fiesta's (90's onwards and the others on the same platform, KA, B-max, etc) may have what you want - but a lot of the newer ones seem to be ET47


be careful if using sites like this:
http://www.wheelfitment.net/ford
or this:
http://www.wheelfitment.eu/PCD/4x108/63.4.html

several of the offset ranges listed on both of these are not correct, and even the ones that are may only be for one model / wheel size...



[Edited on 7/9/2016 by mcerd1]

quote:

---

Originally posted by craigdiver

quote:

---

Originally posted by mcerd1
yes but the offsets are ET52.5 not ET35 to 38 so you may need spacers ~15 to 17mm thick

---

What ford uses 15" wheels with an offset of ET35 to 38, would rather not use spacers if I could help it?

Please tell me it wasn't just the Sierra ;-)

---