More CAD from me...

For anyone who wants them for measurements or for their CAD model. I have a 3d model of a cortina upright (can easily be mirrored if you need a pair).

AFAIK the measurments are right, other than whats below:

1. The steering arm end diameter is wrong, so is the hole. But the centre is correct to my knowledge.

2. The pivots are not to size. Again the centre points are in the correct place.

If anyone needs measurements i can try to take them. But I cant guarantee the dimensions are 100% accurate.

If anyone can tell me the info above I would be most grateful. Also if anyone wants hubs modelled I can do that, just need the measurements.

I can also model some sierra uprights, if anyone can measure some up for me!

Hope someone finds it useful,
David

PS I havent bothered modelling the links between the pivots and the main body...its not some sort of magical upright...

[Edited on 21/1/05 by flak monkey]
Rescued attachment upright.jpg

david thats just dam lasy now how about doing me a zetec, and type nine

Phil

For starters i dont have the dimensions etc for the links.... if someone can find them I'll put them in. As for your zetec....I don't have that long to spend on CAD you know

your only at uni what else do u do during the day

20 page report due in for next monday! Only set this monday... Strain gauge force measuring thingy. Lucky I find time to do anything else! (Especially find time to spend on here )