Hi All

Does anyone know which drive-shaft boots belong on the Fury Original IRS (with the sierra diff). My drive shafts are splined both ends. I think they were cosworth sierra spec originally.

Many thanks
M

Cossie 2wd shafts have 108mm lobro CV joints
Cossie 4x4 shafts have 100mm lobro's
Std GKN boots should be all you need, but if it's a tight squeeze you can get 'fast boots' (lots of car brand use these joints/boots)

https://www.demon-tweeks.com/uk/gkn-standard-cv-joint-boot-117139/

Or:
https://www.demon-tweeks.com/uk/gkn-aerodynamic-cv-joint-boot-243477/


If it's not one of the above then it'll just be a std. Sierra one rather than a cossie