This looks a strange set up..




Its on the rear of an rs2000 rally.. Fiesta and seirra calipers.

Is one just a handbrake pad,usually well used in rallies

Plumbed together it could be a cheap way to increase break pad area.

I think the fiesta caliper is used for the hydraulic handbrake.

Increasing pad area dosen't do much

[Edited on 27/4/05 by britishtrident]

Hi this brake set up is for my Road Rally car. The Caliper on the left is for foot brake only and is controled by a Bi-as box with its own master cylinder.
The Caliper on the right is Handbrake only and controled by the Hydraulic Handbrake in it own seperate system and fluid bottle.
I use comp pads in the handbrake caliper as i have that wound up so at any speed i can give the slightest tug and it works.

have a visit of my site and have a nose
currently rebuilding the engine so not out competeing at present.

www.muddylanes.pwp.blueyonder.co.uk