Board logo

De Dion
Minicooper - 31/8/05 at 07:52 PM

Thanks in advance
With IRS you set the camber and toe, what do you do with the dedion is it perfectly square in both planes?

Cheers
David

britishtrident - 31/8/05 at 08:10 PM

A tiny bit of toe-in and a small dash of negative camber say -0.25 degrees.

Mr G - 31/8/05 at 08:18 PM

quote:
Originally posted by Minicooper
Thanks in advance
With IRS you set the camber and toe, what do you do with the dedion is it perfectly square in both planes?

Cheers
David


You can adjust both later on with shims if you don't want to produce 'built in' figures to the de-dion axle.


Cheers


G