i have a wheel from a catram thanks to a mate upgrading but the boss is wrong, it has splines and i need the hex type

1 anyone need the spline type ? (beer tokens)

2 anyone got a spare hex type or where best to get one

maybe ebay ?

http://cgi.ebay.co.uk/Steering-Wheel-Boss-Hub-Kits-Over-250-Listed_W0QQitemZ8026940032QQcategoryZ40195QQrdZ1QQcmdZViewItem

http://cgi.ebay.co.uk/MOMO-steering-wheel-and-boss-kit_W0QQitemZ8028029271QQcategoryZ40195QQrdZ1QQcmdZViewItem

http://cgi.ebay.co.uk/Steering-Wheel-Boss-Hub-Kits-Over-250-Listed_W0QQitemZ8026940032QQcategoryZ40195QQrdZ1QQcmdZViewItem

in fact loads of steering wheels and bosses

http://search.ebay.co.uk/steering-wheels-boss_W0QQamp;sspagenameZhQ3ahQ3aadvsearchQ3aUkQQcatrefZC5QQfclZ3QQfromZR7QQfrppZ50QQfrtsZ50QQfsooZ1QQfsopZ1QQ nojsprZyQQsacatZQ2d1

I too have a caterham wheel with that splined boss. I couldn't find a sierra column boss with the small-PCD 3 bolt pattern that caterham (and racers) use so I just got a momo sierra boss with the more common larger-PCD 6 bolt arrangement that most aftermarket wheels use, and i'm gonna re-drill my wheel to suit.

Liam

Try Europa £18 + postage

Or be really locost and scavenge the ali boss out of the original sierra bus wheel?

and drill that to suit or make an adapter

Thats what I did because the one I bought was of such low quality, it was binned. It was so bad that the steering lock pawl would not engage on full lock
Rescued attachment Crappy casting.jpg

Completed collapsable home made boss with the original sierra boss as a base
Rescued attachment Boss.jpg