Hi All,this may sound really stupid but I am trying to use sierra master cylinder in MK but am not sure how to or if I can use existing rod which obviously passed through servo-can this be cut and if so how is it fitted back into and held in cylinder??
Also ,any tips on connecting to MK pedals or do I have to add or modify end of rod for pedal to sit in to.
Also any tips on clutch cables for pinto in mk-mk recommends mk 2 escort but I have seen on build site std. sierra used but do not understand how-is brkt fitted to chassis before passing through bulk head?-again any tips on connecting to pedal.
Any help would be most appreciated,thanks Mike.

Yo Mike,the push rod sits in a hole in the master whitch is about 13mm deep,it wont fall out,drill through the pedal and use original clevis pin,as for cables i would use mk 2 escort as it has an adjuster built in and seirra dosnt hth

Mike
Just fitted the M/C in my indy this weekend with help from conrodkid.
If i can get hold of a digital camera in next few days i'll post a pic in the photo archives.

Thanks Bob and C/R Kid,would really appreciate snaps of previously mentioned-the more the better!!!

Mike
finally got the pics,whats ya new e-mail address

Hi Bob,

Could you mail me the photos as well?

On its way.

Well i hope so anyway.

Bob, got your e-mail but cant retrieve pics, dont know why could it be your end??Mike.

Mike
Have sent them again mate.

Hi Mike / Bob

I got your pictures and opened them no problem.
Mike, they were zipped so you need to get hold of something like winzip to unzip them. Try http://www.winzip.com and download the free trial version.

Hope this helps,

Paul, in Paris (not the gay part)