Board logo

steering wheel removal
Dave J - 2/6/06 at 02:05 PM

Dumb question this: I've got a later version of the sierra steering column which is adjustable and has the horn button in the centre.
I wish to change the steering wheel, but having prised the horn button off, there is a further plastic moulding which has the horn contact and springs attached.
I've tried removing this to access the steering wheel nut but it wont budge, it all looks as though it's one with the wheel. I don't particularly want to break it, so is it supposed to pop off, if so I'll give it a bit more gip.

My Haynes manual only shows the early versions.

Thanks for your help

Dave.

fesycresy - 2/6/06 at 02:10 PM

Get the screwdriver under the lip and it'll come off

Dave J - 2/6/06 at 02:42 PM

A bit more gip it is then!

Thanks

tks - 2/6/06 at 03:14 PM

watch out with what you gonna fit!!

mountney bosses are sucks!

Tks

Hellfire - 2/6/06 at 03:28 PM

quote:
Originally posted by tks
watch out with what you gonna fit!!

mountney bosses are sucks!

Tks


Mountney are indeed tihs... go for the MOMO one for £2 more... and centre horn fitment. Retain the Sierra double ring contacts...

DarrenW - 2/6/06 at 03:36 PM

I fitted the raid collapsible boss with my SWM wheel. Good unit. i was lucky to get wheel and snap off kit for nowt.

I used the boss and aftermarket wheel for SVA nbo probs (snap off fitted afterwards).