Hi all,

Just received my new quick rack and rod ends from Rally Design and......... oh bu%*er.....no lock nuts for the track rods!

Anyone know where I can get a pair from or what thread they are please?????

Cheers

if its a metric rack,they're M14,

available from anynut/bolt supplier.

or if you have access to an M14 tap, just drill and tap some M12 Nuts to suit.

Ray

As Ray said M14, not a commonly stocked size. I got mine from a agricultural machinery company (oakes bros, Reading). Common size on farm equip apparently.
- Alan

how much easier would it be if new half nuts were suppliedwith a new rack - money piching barstools !!!

M14 x 2.0 if memory serves me well; not a common size.

to solve your problem, see here:
http://www.locostbuilders.co.uk/viewthread.php?tid=36913

Thanks for the help guys.

There's a farm machinery place on the way to work - I'll try there.

Cheers

not the worlds quickist when it comes to small order delivery but they get there in the end

http://www.gtc-direct.com/index.asp

I have a pair on the desk in front of me, about 35p each from the local Ford dealer and same as Sierra and later Escort racks use as well I think.