Board logo

Siërra rear axle width
dutchsuperseven - 29/4/03 at 06:04 PM

What's the width of the rear trailing arms on a Siërra axle in the normal loaded position. I mean the distance (outside) between the flanges on which the bearing carriers are bolted.

Liam - 29/4/03 at 08:57 PM

Well I make it 1500 from disc to disc (outside edge) which would make it...measures up assembled disc and hub...about 1395 between the outside of the trailing arms (or inside of the hub carriers if you like).

Give or take a couple of mm.

Liam

jcduroc - 30/4/03 at 10:08 PM

quote:
Originally posted by Liam
Well I make it 1500 from disc to disc (outside edge) which would make it...measures up assembled disc and hub...about 1395 between the outside of the trailing arms (or inside of the hub carriers if you like).
Liam


I measured 1530 mm face to face of the drums (1600 Sierra), ie, mounting surface fro the wheels.

João