Board logo

no bulkhead parts... HELP
Findlay234 - 14/8/06 at 09:55 AM

Just recieved my braided brake hoses from MAC1 but two of them came without bulkhead fitting ends...

My first thought was to call them and get them to send out the proper ones but that would just annoy and take time. Before i do that i thought id ask on here if people have used rear brake flexi's without a bulkhead fitting to secure it and how. photos if possible.

John Bonnett - 14/8/06 at 11:23 AM

It really is vitally important that you firmly fix the end of the flexibles to the chassis brackets using the correct bulkhead fittings.

I don't want to preach but your life depends on your brakes so if you do it right you cannot be wrong.

John

Findlay234 - 14/8/06 at 11:35 AM

its ok its sorted. they rung me this morning to appologise and theyll send me out the right ones.

Happy with that and them!!!

02GF74 - 14/8/06 at 11:37 AM

quote:
Originally posted by Findlay234
My first thought was to call them and get them to send out the proper ones but that would just annoy and take time.


you need a proper support, off hand I cannot think of another way.

You have 2 choices:
a) phone and annoy them
b) possibly die due to bodging

(I would strongly hint at choice a) )

phelpsa - 14/8/06 at 11:55 AM

quote:
Originally posted by 02GF74


(I would strongly hint at choice a) )


But you dont know him personally

Findlay234 - 14/8/06 at 12:07 PM

no its sorted now. they phoned me!!!

mac1 - 14/8/06 at 01:48 PM

Findlay,

the new ones are in the post,

Mark

www.mac1motorsports.co.uk

Findlay234 - 14/8/06 at 01:54 PM

Thanks guys. Yeah ive put the others in the post this afternoon as well. Cheers for the excellent customer service!!!