Hope somebody can help me i am looking for a pair of 1/2 inch Clevis, yoke, or fork end with a M12 male thread to support the turnbuckle on my IRS. I
have found some in the springfix catalogue but they will only supply in a min of 30 off as I want 2 this is a bit of overkill. Any suggestions.
As this is load bearing I am assuming that the SVA may require me demonstrate its load bearing capacity so I suspect that I cannot machine one up.
i was looking for one with a 5/8 unf thread, probably for the exact same use as you. Nat gave me a link but i never got round to ringing them. I think
it was racers hardware on 01733211311, unfortunately no web presence. If you have to buy a bundle id probably take 4 off you, ideally 5/8ths as i
already have the inserts made!
Joel Like you I mave made the threaded bush at M12 and the boss at 1/2 so I suspect we are incompatible but hey ho
try a yacht chandlers or local sailing club, these things are all over yacht rigging!
Caber
midwest no longer ship to the UK, except their few regular customers.
Try Tuthill Controls, Hailsham East Sussex.
01323 841510
Thanks Guys I did try chandlers but they seem generally to have much lighter clevises. I will try Tuthill