Board logo

Shocker Lengths
mistergrumpy - 7/10/06 at 05:59 PM

Okay I've been searching but can't reall find anything, can't sem to word it right I think. What I'm after is the length of the shockers I need for standard chassis with GTS front bones and De Dion. Or how do I figure out what I need?


rayward - 7/10/06 at 06:15 PM

set your chassis up at the desired ride height, then measure the distance bewteen the shocker mounting bolt holes, get shocks that range approx 1- 2" either side of that figure.

hth
Ray

[Edited on 7/10/06 by rayward]


mistergrumpy - 7/10/06 at 06:19 PM

Ah right. Thought there was something more complicated to it than that.
Thanks


JoelP - 7/10/06 at 06:49 PM

shocks usually are specified by their open length, and as ray says, you want about 4 inches of travel at the wheel (3" on the shock will give 4 at the wheel due to the angles). Hence if the length is 10.5" when the bones are level, get shocks that are 12" open.


mistergrumpy - 7/10/06 at 09:31 PM

Cheers Joel. Appreciated.


flak monkey - 8/10/06 at 07:24 AM

Std GTS shocker lengths are:

Front: 12" open, 11.25" ride height and 10" closed

Rear: 11.5" open, 10.5" ride height and 8.5" closed

David


mistergrumpy - 8/10/06 at 09:37 AM

Thanks David. That helps. Was thinking of buying in advance you see as there seems to be a lot on EBay at the moment.