Afternoon all.

I need to source some large diamater washers to go between the tube in the brake pedal, and the clevises that go to the two brake master cylinders I have, to stop the clevises rubbing directly on the brake pedal (the clevises are aluminum)

I'm after a external diameter of around 45mm and an internal diameter to suit a 10mm shaft (although this is not important as I can drill it out if it is too small). I guess the thickness needs to be around 1mm or so...

Anyone know where I might be able to buy a handful?

Cheers
Andy

Not sure if they do them, but M10 penny washers must be near the dimensions required.
HTH

Cheers Nige

I found some stainless repair washers on eBay which were perfect for the job.