Board logo

trailing arms
cjtheman - 23/3/07 at 04:34 PM

hi all
would it be a problem if i made my trailing arms out of 20 mm instead of 25 mm as the book states
it is seamless and about 4mm wall thickness
cheers
colin

flak monkey - 23/3/07 at 04:36 PM

Should be fine

ecosse - 23/3/07 at 04:37 PM

I'm using 21mm x 3mm seamless and have told that is overkill (16g ERW is apparently quite usable) so you should be fine at that.

Cheers

Alex