I bought some lolocost suspension bushes. I have read that they are perhaps too hard.

Is this going to cause me any problems?

Thanks

[Edited on 5/4/07 by goodguydrew]

For road use metalastic bushes are best

Can you tell me how wide the crush tube is please ?

It might do on the rear where there is a slight twist but the front should not be a problem.

Hi

I bought two sets from Lolocost (for front & rear IRS) and the ride is OK.

The problem I did have was that the tubes are cut on a "random" saw.
Everything is half a mil short, half a mil big, or a mil out of square.

The poly bushes are not much better. I/D & O/D are OK but the length of the shoulder varies.
I started off trying to match sets, but ended up facing all the components in the lathe to at least end up with a consistent dimension to make the chassis brackets to.

Time will tell as far as durability is concerned.

Paul G