Board logo

front disks
eccsmk - 8/10/07 at 11:50 AM

my donor car is/was a late saphire with large vented frond disks
i would like to know if i can use smaller solid fronts i.e. fiesta/ ka ones with the standard saphire rears or will my braking be all wrong
many thanks

[Edited on 9/10/07 by eccsmk]

[Edited on 9/10/07 by eccsmk]


Ivan - 8/10/07 at 11:52 AM

It all depends on your calliper size, master cylinder sizes and whether you are using a balance bar.


eccsmk - 8/10/07 at 12:08 PM

the calipers ill prob buy new the master cylinder is straight off the saphire


mookaloid - 8/10/07 at 01:46 PM

Are you using rear discs? if so I would stick with larger front discs otherwise you will have too much braking at the rear (not good!)

Cheers

Mark


eccsmk - 8/10/07 at 03:05 PM

i am using standard rear disks yes

so people any links to where i can buy some nice new disks please
thnak you


Ivan - 8/10/07 at 03:08 PM

Somewhere on this forum theres a really good spreadsheet that allows you to feed in all your brake parameters and check the balance (for all-disc system)

Do a search and with a bit of time you should be able to check your system for balance.


eccsmk - 8/10/07 at 03:34 PM

brilliant thank you


Vindi_andy - 9/10/07 at 12:52 PM

I just bought standard ABS vented discs for mine as these are the larger ones and my donor had an ABS system local motor factors for about £15 each IIRC


eccsmk - 9/10/07 at 01:40 PM

had a ring round about 20- 25 pounds each so far but still looking