Board logo

Wheel nuts - UNF
andylancaster3000 - 7/1/08 at 11:04 PM

I was wondering whether it is possible to buy wheel nuts to fit the laser type rs 4 spoke wheel (i.e. with a tapered type washer on them) with a 7/16ths UNF thread. There are plenty about with an m12 thread but i'm trying to avoid having to take the axle apart again(!) to change the studs.

If so, where can they be bought from?

Cheers,

Andy

wicket - 7/1/08 at 11:06 PM

Try Rally Design

andylancaster3000 - 7/1/08 at 11:19 PM

Just looking there now as it happens. The have UNF and metric for the flat type but only metric for the tapered unfortunetly.

The Great Fandango - 8/1/08 at 01:42 AM

Surely these guys do what you're after?...

Linky

britishtrident - 8/1/08 at 01:00 PM

If its for a Ford just change the studs to metric