Board logo

Adjustable Ride Height
thesurfbus - 9/12/03 at 08:51 AM

I am looking to raise the rear suspension on my car,
I have Koni Classics Coil over's with 1.9" ID springs.
Does anyone know where in the UK I could purchase a
kit to convert the shocks to adjustable ride height, I
have seen a similar kit for making Ford front struts
adjustable, its basically a threaded sleeve which
fit's over the shock body, and a threaded spring seat.
The other alternative is to fit an alloy spacer, but
can't seem to find anyone who sells them.
I want to raise the rear by about 1", my springs are
12" long but the next longest you can buy are 14".

Any thoughts welcome.

Doug


pbura - 9/12/03 at 01:47 PM

Here's a list of Koni racing outlets:

http://www.racecar.co.uk/koni/stockistsmain.htm

Coilover kits look so generic (perches, sleeves, nuts) that I imagine you could use any brand.

Best of luck!

Pete


dozracing - 10/12/03 at 01:07 PM

Tell me the OD of the shock cartridge and perhaps my spring adjusters will work for you from my shock kit.

www.gtstuning.co.uk

Kind regards,

Darren