Im half way through my pedal box consruction, and im not going to use my BMW master cylinder.

Any recomendations on what to get? Baring in mind cost! Plus my engine has hydraulic clutch so will need another master cylinder for this aswell.

So whats everyone else used?

Cheers

i'm using the girling type. pretty much universal, pretty cheap too i think. you can get them for £25 each (but not actual girling ones)

[Edited on 28/8/08 by blakep82]

where abouts can you get them from?

http://www.cbsonline.co.uk/master-cylinders-44-c.asp

well, £28 for girling ones from CBS

or wilwood from rally design
http://www.rallydesign.co.uk/index.php?cPath=562_582

little bit cheaper (both need vat applied)

integral ones are a little more expensive, but non integral ones need a additional resevoir

and which master cylinders should i be looking at for brakes? whats needed for back and whats needed for front? and what about clutch?

I've got a brand new Girling remote.75" one spare 'cause I switched to .675" for my clutch. £20 plus postage if you are interested.

[Edited on 29/8/08 by sucksqueezebangblow]