
After looking back through my previous threads from when I started this project (2005) I am now thoroughly confused as to what axle I have!!
I have the axle, a 3.77 diff to fit (it bolts on to the axle rather than having a cover plate only...if that helps?) and the half shafts. I need
bearings and retaining plates for the shafts.
Can anyone PLEASE!! help me decide what axle I actually have?
Originally I was told it was a P100 but now I'm not so sure.
Thanks in advance,
JBImage deleted by owner
If I'm not mistaken, you have an English axle out of a mk2 escort.
Its not an atlas one, because that bolts in from the rear, and its not out of a capri becuase the mounts are in the wrong place.
.......and I don't think you are mistaken!
looks just like my MKII escort axel
I'm guessing that this is probably an Escort axle then?
Can I assume that the bearings should be relatively easy to get (easier than fitting I guess!)
JB
Hi.
Not only is it an escort English axle but if you do have a rare 3.7 ratio. Remember to ask for the correct amount of cash if you decide to sell the
diff unit.
Thats assuming it is in good condition and you want to change to a different ratio.
Cheers Matt
it's mk2 escort english axle, but upside down atm, breather is at the bottom 
Many thanks for all the responsesl.
As this is the second of 2 axles that I had and is a the longer one by a couple of inches, can I assume it may be off a van perhaps?
I went with this one because I am going the +442 route.
JB
Aha!
Capri MK1 English axle. 2" wider than escort, very rare, and worth more (over £100 used) Gives more clearance between wheel and chassis.
Recently sold one needing repair for £85!
Thanks to this thread I am completely certain that my axle is an English one, but how do the Capri mounting points differ from the Escort Mk2 ones? I
almost certain I have the latter.
Also, without opening the axle is there any easy way to tell what ratio it is?
Thanks.
quote:
Originally posted by nastysimon
Thanks to this thread I am completely certain that my axle is an English one, but how do the Capri mounting points differ from the Escort Mk2 ones? I almost certain I have the latter.
Also, without opening the axle is there any easy way to tell what ratio it is?
Thanks.