Board logo

Ron's 'Wrong' Book
Daddylonglegs - 18/9/08 at 07:29 AM

Mornin' all.

Trying to get the bones sorted in terms of sizes, and I am really getting conflicting info. The more I read, the more I'm confused

Everyone seems to say that the RC Book is wrong in terms of the measurements for the front suspension but no-one seems to say where it is wrong?

If anyone can shed some light I would be most grateful.

Also, there doesn't seem to be any measurements for the front suspension from the side (as in McSorley's diagrams).

nitram38 - 18/9/08 at 09:45 AM

As far as I am aware, the top bone on the front wheels is not far enough back to give enough castor for centering your steering.
I seem to remember a measurement of 22mm difference.
Someone will be along to confirm wether they altered their bones or the mounting points.......
In the meantime, do a search for centering and you might find your answer there.

whitestu - 18/9/08 at 10:17 AM

Try this post:
[the wishbone mod is at the bottom]

Link

Stu

Daddylonglegs - 18/9/08 at 11:13 AM

quote:
Originally posted by whitestu
Try this post:
[the wishbone mod is at the bottom]

Link

Stu


Thanks Stu. That's what I needed. I've looked at so much info and 'suspension design' programs etc. that I'm more confused than when I started!

I guess it's best to go for the same materials as in the book too then? I did think of using 25mm for the tubes but not sure because I don't know where I'm going to get my bushes and crush tubes yet.

JB