hi doz anyone have a good blade fuel pump for a bec 96/97/98 engine
i have one of an r1 willing to swap or sell thanks jonny
Joni
If the R1 pump is for a carbed engine then it really doesn't matter that it was on a Yamaha not a Honda originally! Most of them are Mitsubishi
anyway!
In other words, use the one you have!
[Edited on 22/9/10 by carpmart]
BTW - the Fireblade's I think were originally gravity fed anyway!
The RRT V & W blades didn't have pumps, any carbed bike pump will do, they are nearly all made by mitsubishi anyway. So just find one with the inlet and outlet which best suit your installation.
my 983 has a pump...
i have a low preasure walbro pump if thats any good?
was talkin to andy from ab and he said it would over fuel on a r1 pump
quote:
Originally posted by joni
was talkin to andy from ab and he said it would over fuel on a r1 pump
This will do the job.
http://cgi.ebay.co.uk/ZXR400-Fuel-Pump-Assembly-L-series-bikes-/260666540234?pt=UK_Motorcycle_Parts&hash=item3cb0efc0ca
My 893 blade lump is supplied fuel by a yamaha R1 fuel pump.
Been going strong for 1 year.
No over fueling issues.
Make sure you get one from a CARBED r1, or it will overfuel.
They self regulate the pressure
[Edited on 22/9/10 by Dangle_kt]