OT

A bit of a long shot, but has anybody got a pair of wheelchairgolf buggymobility scooter motors they don't want ?

I need them for the electric Landrover I'm building for my girls.

I'll be impressed if LCBs can come up trumps for this one !!

I have a pair of high torque 24 volt motors ?

Do they have gearboxes on them ?

Sorry no gearboxes on the side it says Bosh CVA 24 v
they are 100mm in dia and 150mm long and have a 12mm shaft
At the moment there is a small drive cog on each one
they are mounted on three bolts on the front face
hope this helps

Thanks, but I need the ones with the reduction gearbox like these


Description

Thanks anyway

There used to be a regular at Rufforth autojumble who sold them, always had a stall at the bottom of the indoor central isle.
12v DC high torque motors with gearbox. Iv'e got one which i was going to use for an electric reverse. IIRC they were very reasonably priced.

Al.







Originally posted by Wheels244
OT

A bit of a long shot, but has anybody got a pair of wheelchairgolf buggymobility scooter motors they don't want ?

I need them for the electric Landrover I'm building for my girls.

I'll be impressed if LCBs can come up trumps for this one !!

Ok mate no problems

quote:

---

Originally posted by Wadders
There used to be a regular at Rufforth autojumble who sold them, always had a stall at the bottom of the indoor central isle.
12v DC high torque motors with gearbox. Iv'e got one which i was going to use for an electric reverse. IIRC they were very reasonably priced.

Al.







Originally posted by Wheels244
OT

A bit of a long shot, but has anybody got a pair of wheelchairgolf buggymobility scooter motors they don't want ?

I need them for the electric Landrover I'm building for my girls.

I'll be impressed if LCBs can come up trumps for this one !!

---

I may be your man.

My profession is a Rehabilitation Engineer and I scrap these sorts of things on a weekly basis!

My only issue is I am based south east London so you are a long way away.

U2U me and ill help you out.

Never under estimate the randomness of LCB!

Biz

Pretty sure i paid £38 Rob, but it was a good while back and they have probably gone up, if you do go down that route, just buy one, and you can have this one at half of whatever they cost now Doubt i'll ever use it now.

I'll dig it out tomorrow and post a pic.

Al.





Thanks Al

Any idea how much they are ?
That gives me the perfect excuse to visit the Autojumble again I haven't been for a quite a while.

Rob

quote:

---

Originally posted by bi22le
I may be your man.

My profession is a Rehabilitation Engineer and I scrap these sorts of things on a weekly basis!

My only issue is I am based south east London so you are a long way away.

U2U me and ill help you out.

Never under estimate the randomness of LCB!

Biz

---

I've got an old leccy chair that was my dads, been in the shed for 3 years so can't guarantee quality of battery's or motors
You're welcome to it foc !

I've got an old leccy chair that was my dads, been in the shed for 3 years so can't guarantee quality of battery's or motors
You're welcome to it foc !

Double post -oops -hic !!

I used a pair in the landrover i built for my grandson about 10 years ago
If its a toylander save youselve heaps of hassle and your back, by building it out of ply, not MDF as it says in the plan
mine was scaled down slightley, but was nearly as heavy as my 7

If i was doing it again, i would use cordless drills, in stead of wheelchair motors, as they are very heavy


steve

I have a pair of those motors from Rufforth man, They have a four bolt hub to take a wheel , I dont Know about gearboxes but there is a lever which I guess is for reverse.
I will dig them out and report back later.
Regards Denis

quote:

---

Originally posted by keith777
I've got an old leccy chair that was my dads, been in the shed for 3 years so can't guarantee quality of battery's or motors
You're welcome to it foc !

---

quote:

---

Originally posted by kipper
I have a pair of those motors from Rufforth man, They have a four bolt hub to take a wheel , I dont Know about gearboxes but there is a lever which I guess is for reverse.
I will dig them out and report back later.
Regards Denis

---

quote:

---

Originally posted by Wadders
Pretty sure i paid £38 Rob, but it was a good while back and they have probably gone up, if you do go down that route, just buy one, and you can have this one at half of whatever they cost now Doubt i'll ever use it now.

I'll dig it out tomorrow and post a pic.

Al.





Thanks Al

Any idea how much they are ?
That gives me the perfect excuse to visit the Autojumble again I haven't been for a quite a while.

Rob

---

Pics of motors are now in my archive, £50 sound about right?
Denis.