Board logo

Can anybody make me a roll bar around south lincs?
nathanharris1987 - 14/3/08 at 10:05 AM

Ive been waiting on a chappy from kettering for half a year to make me a roll bar, chasing him quite regular but ive finally given up.

Can anybody around lincs or cambs knock us one up? Im lookin a having a fairly chunky single loop with one horizontal cross member. Got a CAD drawing i can email.

ta,

Nath


MikeCapon - 14/3/08 at 10:10 AM

You'll need a lot of steel to do that. Is there another earthquake coming?


nathanharris1987 - 14/3/08 at 10:14 AM

je ne comprends pas?

talking bout the earthquake, check this email i got;

LINCOLNSHIRE EARTHQUAKE APPEAL PLEASE GIVE GENEROUSLY
>
> A major earthquake measuring 5.2 on the Richter scale hit Lincolnshire
> in the early hours today. Its epicentre was in the Market Rasen area.
> Victims were seen meandering around aimlessly, muttering
> "Faaackinell".
>
> The earthquake decimated the area causing approximately £30 worth of
> damage. Several priceless collections of historic tractors were
> damaged beyond repair and all three of the County's compoooooters went
> down.
>
> Three areas of historic scare crows were disturbed. Many locals were
> woken well before their press gang Transit mini buses arrived.
>
> Lincs FM reported that hundreds of residents were confused and
> bewildered and were still trying to come to terms with the fact that something interesting had happened in Lincolnshire.
>
> One resident - Tracy Sharon Smith, a 15-year-old mother of 5 said, "It
> was such a shock, my little Chardonnay-Mercedes come running into my
> bedroom crying. My youngest two, Tyler-Morgan and Victoria-Storm slept
> through it all. I was still shaking when I was skinning up and
> watching Jeremey Kyle later in the morning."
>
> Another resident said, 'I was in bed with my five daughters and their
> grandmother, as usual, and on feeling the vibrations I nudged my mum
> in the back and said 'Has that disturbed the ducks, Duck?'
>
> Apparently looting, muggings and car crime were unaffected and carried
> on as normal. The British Red Cross has so far managed to ship 4,000
> crates of Sunny Delight to the area to help the stricken locals.
>
> Rescue workers are still searching through the rubble and have found
> large quantities of personal belongings, including benefit books,
> jewellery from Elizabeth Duke at Argos and Bone China from Poundland.
>
> HOW CAN YOU HELP?
>
> This appeal is to raise money for food and clothing parcels for those
> unfortunate enough to be caught up in this disaster.
>
> Clothing is most sought after - items most needed include: Fila or
> Burberry baseball caps Kappa tracksuit tops (his and hers) Shell suits
> (female) White sport socks
>
> Wellington Boots & Barbour jackets
> Rockport boots and any other items usually sold in Primark. Food
> parcels may be harder to come by, but are needed all the same.
>
> Required foodstuffs include:
> Microwave meals, Tins of baked beans, Ice cream, Cans of Colt 45 or
> Special Brew.
> 22p buys a biro for filling in the compensation forms and their giros.
> £2 buys chips, crisps and blue fizzy drinks for a family of 9.
> £5 buys B&H and a lighter to calm the nerves of those affected.
>
> Breaking news***
> Rescue workers found a girl in the rubble smothered in raspberry
> alco-pop.
> 'Where are you bleeding from?' they asked, "Scunthorpe" said the girl,
> wossit gotta do wiv you?"
>
> Please don't forward this to anyone living in Spalding/Boston area -
> oh, sod it... they won't be able to read it anyway


MikeCapon - 14/3/08 at 10:20 AM

Sorry Nathan, I'm just a bit warped. Read your question:

Can anybody make me a roll bar around south lincs?


nathanharris1987 - 14/3/08 at 10:25 AM

ahhh i get ya now, sorry let me rephrase that to "within the region of" but if anyone could protect us from future natural disasters and quarantine lincolnshire it'd probably be a good idea.


owelly - 14/3/08 at 10:26 AM

Not just me then? I was wondering if there was a ring road to bend the tube around.........


MikeCapon - 14/3/08 at 10:38 AM

Sorry about all these daft replies Nathan. Don't worry. I'm sure there will be a sensible one along in a minute!


balidey - 14/3/08 at 10:38 AM

Not sure if these guys do them....

http://stores.ebay.co.uk/casarva-custom-conversions

But they are very helpful, Mark (paradoxia0) used them and I collected the parts for him, they seemed like really nice blokes. They are based in Baston, so just into Cambs, but only a few miles from you.

EDIT: sorry, missed of a silly response, so hope this makes up for it...

BOOBIES

[Edited on 14/3/08 by balidey]


r3nuf - 14/3/08 at 10:50 AM

You could try "Tube Engineers Ltd."
They are at Market Rasen.
01673862286

Not sure if they are any good for rollbars, but they fabricated my exhaust, which is ace.


HTH
Gary


nathanharris1987 - 14/3/08 at 10:55 AM

AHAR!

Yeh i just spoke to Mark on msn and he mentioned them and ive emailed casarva.

You're Marks co builder and operational support unit (for when he thinks his car is amphibious) then?

As for the sillyness, im sure its physically impossible for a bloke to say boobies without smiling.


welderman - 14/3/08 at 10:56 AM

just ordered a 16k bender includes formers (for work).
Might be able to do you one or others in 6 weeks time.
I want a roll bar for my fury myself so thought it was a good investment.


balidey - 14/3/08 at 12:37 PM

quote:
Originally posted by nathanharris1987
You're Marks co builder and operational support unit (for when he thinks his car is amphibious) then?


Correct

quote:
Originally posted by nathanharris1987
As for the sillyness, im sure its physically impossible for a bloke to say boobies without smiling.

Correct


Mal - 14/3/08 at 12:47 PM

I have used this company to make roll bar components and have only taken a few days to do the work.

Hauser Racing
101a Irthlingborough Road.
Finedon
Northants
NN9 5EJ.
England U.K.
Tel. +44 (0)1933 682500
Fax. +44 (0)1933 682700
www.hauserracing.com

HTH

Mal


Volvorsport - 14/3/08 at 12:47 PM

btb exhausts .


coozer - 14/3/08 at 01:16 PM

What about Sylva Autokits? they are quite close, I believe...


muzchap - 14/3/08 at 01:51 PM

I'll second CASARVA!!!

MATT is a top bloke - he won't let you down!

If it was my money - I'd be choosing CASARVA, no offence to anybody else's suggestions, just I can 100% vouch for the quality of workmanship.

Cheers,

Murray


Myke 2463 - 14/3/08 at 06:28 PM

Hi Have you tried Guttridges @ wardentree park just down the road. they have lasser tube cutting tools.
Mike