coozer
|
 posted on 13/12/08 at 10:02 PM |
|
|
Sierra Upright Replacements
I want to change my Sierra uprights for something much lighter.
Is there any light uprights that I can change to that bolt straight up and give the same incline and camber setup???
Steve
1972 V8 Jago
1980 Z750
|
|
|
|
|
StevieB
|
| posted on 13/12/08 at 10:32 PM |
|
|
I think the general answer is that unless MNR start to produce the race-leda upright in sierra geometry again, there's nothing available at the
moment.
|
|
|
rotax78
|
| posted on 13/12/08 at 11:33 PM |
|
|
have you seen these on the bay
linky
|
|
|
coozer
|
| posted on 14/12/08 at 02:06 PM |
|
|
quote:
Originally posted by rotax78
have you seen these on the bay
linky
Not sure how they fix on, the top looks simple but how about the bottom and special track rod ends???
1972 V8 Jago
1980 Z750
|
|
|
Mal
|
| posted on 14/12/08 at 02:40 PM |
|
|
Geometry
I wonder if these would be suitable. By eye they go not appear to have any king pin inclination, ie the splidle axis is at 90 degress to the line
through the centres of the upper and lower pivot centres.
|
|
|
MikeR
|
| posted on 14/12/08 at 03:04 PM |
|
|
i suspect they'll manufacture these for racing and state something similar when they sell them. The idea being that they won't want the
hassle / risk if something breaks after being used for a year or two on the road.
|
|
|
designer
|
| posted on 14/12/08 at 04:57 PM |
|
|
These are designed for use on Stock Cars, F2 I think.
Not a straight swap.
|
|
|
