madteg
|
| posted on 4/2/09 at 09:34 PM |
|
|
Cortina disc question
What is the pcd of the bolt holes, thanks.
|
|
|
|
|
tomprescott
|
| posted on 4/2/09 at 09:41 PM |
|
|
I think most fords are 4x108, if not its probably like old golfs at 4x100 but I would be more inclined with 108. Don't forget offset either if
you're looking to buy wheels.
|
|
|
madteg
|
| posted on 4/2/09 at 09:45 PM |
|
|
I thought it was 108 but don't the discs bolt onto the rear of the hub and not over the wheel studs.
|
|
|
24vseven
|
| posted on 4/2/09 at 09:47 PM |
|
|
yes the pcd is different to the wheel pcd i can check tomorrow i think its about 76mm
|
|
|
tomprescott
|
| posted on 4/2/09 at 09:52 PM |
|
|
yeah not too sure on the other fitting, sorry I couldn't help.
|
|
|
DavidM
|
| posted on 5/2/09 at 12:08 AM |
|
|
Hi Kev,
The disc holes measure about 93 mm PCD.
David
Proportion is Everything
|
|
|
