Xtreme Kermit
|
| posted on 15/3/09 at 10:37 PM |
|
|
Lobro driveshafts - different types?
I need to obtain a set of lobro joint sierra driveshafts for an upcoming diff change.
I will be using a 7" diff.
Are there different lenghts out there, and if so which ones do I need?
|
|
|
|
|
James
|
| posted on 16/3/09 at 10:32 AM |
|
|
AFAIK they're all the same length.
HTH,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
Xtreme Kermit
|
| posted on 16/3/09 at 02:14 PM |
|
|
Thanks James, do you know if that includes the cossy?
|
|
|
mads
|
| posted on 16/3/09 at 11:44 PM |
|
|
does this also apply to the push-in shafts? (obviously number of splines is one thing to bear in mind).
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
