wicket
|
 posted on 5/8/02 at 12:49 PM |
|
|
Which way round should the m/cylinders be
Help!!!!!! We are building up the brake system with 2 master cylinders, 1x5/8" 1x3/4"; pedal bias bar; Cortina uprights; Cortina rear axle with 8"
drums. The question is which m/c should go to the front? We are getting conflicting info here from various sources, any ideas and definitive answers
would be very welcome !!
|
|
|
|
|
johnston
|
| posted on 5/8/02 at 09:14 PM |
|
|
dont think there is a definative answer just make sure if your using a knob to adjust it that you mark which ways is to front and which is too rear or
else you might catch yoursel out
|
|
|
