norm007
|
| posted on 3/7/09 at 07:53 AM |
|
|
Will 7.5" crown wheel fit in 7" diff
Good morning.
Could anybody tell me if the 3.92 crown wheel and pinion from a 7.5" diff will fit into my 3.62 7" diff please?
Also, is it possible to swap the bolt on shafts to push in?
Any pitfalls or pointers?
Thanks
Dave
[Edited on 3/7/09 by norm007]
Something about this, so very wrong.....I have to laugh out loud, I wish I didn`t like this!!!!!!!!!!!!!!
|
|
|
|
|
imp paul
|
| posted on 3/7/09 at 09:20 AM |
|
|
I do think it will as its only the outside case of the diff that is wider as far as i know give it a go 
|
|
|
dan__wright
|
| posted on 3/7/09 at 09:24 AM |
|
|
i have a 3.92 push in i would swap if your interested as i need a lower ratio
|
|
|
norm007
|
| posted on 3/7/09 at 09:33 AM |
|
|
quote:
Originally posted by dan__wright
i have a 3.92 push in i would swap if your interested as i need a lower ratio
U2U sent
Something about this, so very wrong.....I have to laugh out loud, I wish I didn`t like this!!!!!!!!!!!!!!
|
|
|
Liam
|
| posted on 3/7/09 at 11:03 AM |
|
|
I rather doubt it, or they wouldn't have needed to design and manufacture a larger case for the larger diff!
|
|
|
snapper
|
| posted on 3/7/09 at 06:07 PM |
|
|
does not fit.
Even if you could attach it to the planet gear arangement the pinion gear would need to be further back in the bearings.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
MikeRJ
|
| posted on 4/7/09 at 05:17 PM |
|
|
quote:
Originally posted by imp paul
I do think it will as its only the outside case of the diff that is wider as far as i know give it a go
The 7.5" refers to the diameter from the crown wheel, not the external dimensions of the diff.
7" and 7.5" crownwheels are not interchangeable.
|
|
|
norm007
|
| posted on 4/7/09 at 05:54 PM |
|
|
So, does that mean I could modify a complete 7.5" diff down to 7" ???
Drive shaft lengths, etc etc etc???
[Edited on 7/7/09 by norm007]
Something about this, so very wrong.....I have to laugh out loud, I wish I didn`t like this!!!!!!!!!!!!!!
|
|
|
norm007
|
| posted on 4/7/09 at 05:55 PM |
|
|
quote:
Originally posted by dan__wright
i have a 3.92 push in i would swap if your interested as i need a lower ratio
Yes please, I am very interested
Something about this, so very wrong.....I have to laugh out loud, I wish I didn`t like this!!!!!!!!!!!!!!
|
|
|
.JPG)
